FaraSakht Novin Zarfam, utilizing modern technologies and high-quality raw materials, has produced the Zarfam prefabricated pool, which not only features beautiful design but also offers long-lasting durability and resistance to various weather and chemical conditions. However, like any product, the pool requires protection and maintenance. Therefore, understanding how to maintain your Zarfam fiberglass pool is important. If you are unaware of proper maintenance techniques, you may cause significant damage to the pool and reduce its lifespan. As a result, it is crucial to know how to properly care for and maintain your pool.
In this section, we will explore the essential tips and methods for maintaining Zarfam fiberglass pools.
Our goal is to provide a comprehensive guide for owners of Zarfam brand pools by FaraSakht Novin Zarfam. With the information presented in the following content, you will be able to enjoy your fiberglass pool to the fullest and keep it in optimal condition.
Cleaning the Pool
When cleaning the pool walls, use alkaline cleaners, hand powder detergent, or dishwashing liquid. It is important to note that cleaning the skimmer, nozzles, and lights with these cleaners is also fine.
Checking the Skimmer Basket and Cleaning It
The skimmer is equipped with a basket to collect floating debris like leaves and other objects in the pool's water circulation system. This basket should be inspected at least once a week, emptied, and cleaned.
Acid Cleaning the Pool Surface
Due to the hardness of the water and the presence of calcium, iron, and minerals in different areas, white stains may appear over time on the pool walls. These can be removed by acid cleaning using a descaler or a special acid for cleaning (for ceramic pools).
Tools for Acid Cleaning:
Plastic handle broom
Kitchen or construction gloves
Soft cloth and sponge
Face mask
Rubber boots
First, mix the purchased acid with 30-50% water (adjust the acid-to-water ratio based on the amount of scale deposited on the pool's surface).
Pour the mixed solution into a sprayer and spray it on the pool walls.
Be cautious not to spill the solution on the lights, nozzles, or skimmer.
After about ten minutes, use the plastic broom to scrub the pool walls and then rinse with water (start by washing the walls and finish with the pool floor).
Drain the water and acid collected at the pool's bottom using a sump pump or manually.
In the final step, wash all the pool walls and floor, and backwash the filtration system to completely drain the water.
Precautions
Due to the fumes generated by the acid, keep children, people with allergies, and those with respiratory conditions away from the area.
Acid cleaning should be performed early in the morning or during the night in summer due to the high temperatures.
Avoid using sandpapers under 320 grit, steel wool, or sharp and abrasive tools during the cleaning process.
Given the high resistance of these pools to acids, the acid cleaning process will not cause any damage.
Winter Pool Maintenance
Given the materials used in Zarfam pools, these pools are resistant to temperatures as low as -50°C, and keeping the pool full during the winter is not prohibited. However, to prevent damage to the pipes, pump, and sand filter, the pool water should be drained to below the nozzles and skimmer in winter, and the water inside the pipes, pump, filter, and chlorinator should be fully drained.